Will a Gas Stove work without Electricity?

In this brief guide, we will answer the question, ‘Will a gas stove work without electricity?’. We will also look at different designs of the stove and how they work.

Will a Gas Stove work without Electricity?

Gas stoves can work without electricity. They only use a little bit of electricity to ignite the stove initially. However, you can bypass that by manually igniting a match and putting it near the burner for the gas to catch fire. This cuts down the whole purpose of using electricity in the first place.

Contemporary gas stoves are designed to work with electricity. In ordinary operating conditions, your gas stove needs electricity to light up. However, if you are experiencing a power outage, you can switch to a gas-based option to light up the stove. You can opt for matchsticks to light up the burner instead.

Gas Pilot Light versus Electric Ignition

 Older versions of stovetops manufactured before the 1990s are still widely used that need fire to start up. The newer ones that work with electricity have mostly replaced them. 

The new ovens have an electric starter of which only some can light up using a matchstick. 

The most recent ones, however, are not built to be lit up by a matchstick. Due to safety reasons, you can not light up the stove using a match stick. Such stoves have a safety valve that prevents your stove from lighting up until it has access to a live circuit. 

What is the technical difference between Gas-pilot Ignition and Electrical Ignition?

The old-fashioned stovetop can work with a matchstick ignition. When the electronic burner ignition stops, you could allow the flow of natural or propane gas to reach the ignition.

The new stoves have a solenoid valve that obstructs the flow of the gas towards the gas valve. The technology is a safety feature that prevents your stove from lighting up without a power source. The electric side is a part of the burner system. 

Even though the gas stove uses gas to sustain the flame, however, for initiation access to current must be provided. The power is not used in the heating process rather than for start-up, lights, clock/timer.

How do gas-pilot Ignition Stoves work?

If a gas-stove was built before the previous two decades, you could easily bypass the electrical ignition and instead use a matchstick to light up a stove. 

The older stoves come with a standing pilot flame. In such a case, a technique called hydraulic pressure operates the gas valve. 

 In case flame sensors and temperature sensors are ignited by the hydraulic-technique; the stove will work in case of a power failure. 

To tell if your stove works without an electrical ignition source, turn the knob; if you hear a hissing sound, this implies you only need an ignition source to turn it on.

Other FAQs about Stoves which you may be interested in.

How to fix orange flame on the gas stove?

How to fix uneven stove burners?

How to use the earlier gas stove without electricity?

  • Turn all of the stove dials and buttons.
  • Locate holes at the center of the burner. Light up the matchstick and bring the flame to the holes.
  • Hold the matchstick carefully to avoid burning your fingers. You have only a few seconds before the match stick burns down toward your fingers.
  • After the burner lights up, you can put out the match light. Blow on it to put the fire out.  You could cut off the oxygen supply to put it out. 

How do Electrical Ignition Stoves work?

If you use a gas oven that comes with the electric glow-bar ignition system, then without an electric supply, the stove will not work. The igniter needs to turn on. 

The flame and temperature sensors are connected electrically to the gas valve, then the oven won’t light up without electricity. 

In conclusion, the gas valve connects to the ignitor in a circuit that prevents it from lighting up unless it has access to an electrical source. 

Can you use Electrical Ignition Stoves without an electric supply?

You can make an electrical Ignition Stove work in the absence of electrical power. The hack requires you to substitute the electrical current with a power inverter together and a 12-volt battery. The external power source can just as easily light up your stove. If you are using a car battery to power your stovetop only, it will not deplete much of it.

You can remove the 12-Volt battery from your car or lawnmower. The inverter you need must support 400 Volt power. It can be purchased online or from any electrical store. 

Connect the 400 watt DC to AC inverter to the 12-Volt battery. Then plug the inverter into the stove to enable the current to flow through and light up the burner. 

Alternatively, you can even opt to leave the inverter inside the car. In such a case, you only need an extension cord to attach your stove to the battery and inverter; that is present in the car.

However, you cannot use an inverter to light up the oven because it needs a large amount of power to turn it on.

In this brief guide, we answered the question, ‘Will a gas stove work without electricity?’. We also looked at different designs of the stove. We also explored the ways they work and if they can be lit up without electricity.