What does F2 mean on a stove?

In this brief guide, we are going to answer the question “what does F2 mean on a stove” with an in-depth analysis of what it means if your stove shows F2. Moreover, we are going to discuss the way to find the reason lying behind the F2 error and different four-digit F2 errors for Whirlpool stoves.

So without much ado, let’s dive in and figure out more about it.

What does F2 mean on a stove?

F2 code, by and large, suggests that your stove has warmed excessively. There may be an issue with the temperature sensor of your stove that has brought about this issue. Besides, there can likewise be an issue with the control board of the stove and when that is the case it isn’t vital that the stove is too hot yet the explanation can be that your control board is simply giving bogus readings, and in this scenario, the best thing you can do is to replace the control board.

How to find the reason for the F2 code on the stove?

First thing first, we need to know the specific reason behind why the stove is demonstrating the F2 error. There can be a possibility that it is only a glitch that occurred due to an issue with the LCD screen of the stove. 

The F2 will flash on the screen and it will signal twice. Subsequently, the stove will shut down yet you will be able to see F2 frozen on the screen of the stove.

Now unplug the stove and after 30 seconds replug it again to see if the screen still shows the F2 error. If the screen does not show the F2 error after you plug it again then that means it was just a glitch.

But if after plugging the stove again, it still shows the F2 error then it means that it was not simply a glitch and there is something wrong with the assembly of the stove. Yet, sometimes after replugging the stove, it might work just incidentally, which implies either the sensor or control board is faulty. The sensor is genuinely simple to test and supplant, so you ought to do that before you stress over the control board.

So what you can do is to check the temperature sensor of the oven to see if there is a problem related to it. 

You have to look for the damaged or faulty wires because if the wires are faulty then it means that your oven was not reading the actual reading of heat generated. 

In case of the damaged wires, you still have to replace the whole of the temperature sensor. But if there is no problem with that then you can move forward with checking the control board of the stove. 

Moreover, you can also test whether or not the sensor is working fine by the use of an ohmmeter. You can read how to test the temperature sensor of the oven here.

Now is the time when you should look for the relay that is situated near the broiler on the top of the stove and inspect it. If you find any fault in the relay, it means that it is the control board of the oven that you have to replace. 

So after you have discovered the specific piece of the stove that is causing the issue, you can either supplant it physically or you can take the help of some expert. 

In the event that you can’t discover the principle explanation behind the F2 error even after following all the steps referenced above on your own then it is an exemplary opportunity to contact the stove repair service.

What are the different types of 4 digit F2 codes for Whirlpool stoves?

F2-E0 – Shorted Touch Pad (Keypad)

You should consider checking the association between the touchpad and the control board (clock) to ensure it is secure. Afterward, select the ‘cancel’ function of the stove and stand by for 60 seconds. 

On the off chance that the error code returns, at that point, you should consider replacing the touchpad. You have to replace both the touchpad and control board (clock) if both are in one assembly. 

F2-E1 – Touch Pad (Keypad) Cable Unplugged 

You should consider checking the association between the touchpad and the control board (clock) to ensure it is secure. Afterward, select the ‘cancel’ function of the stove and stand by for 60 seconds. 

On the off chance that the error code returns, at that point, you should consider replacing the touchpad. You have to replace both the touchpad and control board (clock) if both are in one assembly. 

F2-E5 or F2-E6 – Cancel Key Line Open 

You should consider checking the association between the touchpad and the control board (clock) to ensure it is secure.  Afterward, select the ‘cancel’ function of the stove and stand by 60 for seconds. 

On the off chance that mistake code returns, at that point, you should consider replacing the touchpad. You have to replace both the touchpad and control board (clock) if both are in one assembly. 

Conclusion

In this brief guide, we answered the question “what does F2 mean on a stove” with an in-depth analysis of what it means if your stove shows F2. Moreover, we discussed the way to find the reason lying behind the F2 error and different four-digit F2 errors for Whirlpool stoves.

Citations

https://www.hunker.com/13416829/how-to-fix-a-ge-oven-showing-error-f2

https://www.expressrepairwinnipeg.ca/general-electric-oven-is-displaying-f2-error/

https://www.partselect.com/JustForFun/Whirlpool-Appliance-Fault-Codes.aspx

Mahnoor Asghar is a Clinical Nutritionist with a bachelor's degree in Nutrition and Dietetics. She is compassionate and dedicated to playing her part in the well-being of the masses. She wants to play a fruitful role in creating nutrition and health-related awareness among the general public. Additionally, she has a keen eye for detail and loves to create content related to food, nutrition, health, and wellness.

Leave a Reply

Your email address will not be published. Required fields are marked *