How to unhook a gas stove?

In this brief guide, we will answer the question “How to unhook a gas stove?”, discuss is it safe to disconnect a gas stove by yourself, and how to replace a gas stove.

How to unhook a gas stove?

To unhook a gas stove, first of all, you have to move out the stove, and then you have to disconnect the gas.

Move out the stove

While you plan to unhook the gas stove, the first thing is to move out the stove from the wall behind. To avoid any scratch on the floor of your kitchen, try to move out the stove by using a board or large piece of wood that befits the area of your kitchen floor. Lift the stove off the floor and apply some pressure on the safety gadget (so that the stove cannot tip) so that the lower corner of the stove is necessitated to find its way to the anti-slip casing. Now, continue sliding the stove till its corner gets separated from the casing of the anti-slip.

Use wooden planks to reveal the gas line connection. Put the stove on the posterior legs and move the wood under and then actuate the flat wood below. This is the right time to locate and unplug the wire which links the power source to the stove. There is no particular tool required to release the plug as it can be easily removed from the outlet. (the place where we have a regular stove plugged in to give it power for the spring mechanism)

Disconnect the gas

The next step to follow when you plan to unhook the gas stove is to disconnect the gas. For this, follow the pipes that connect the gas outlet with the stove. The pipe of your interest is customarily resilient and placed near the kitchen floor.

On reaching the pipe, find the gas shut off valve and then direct the lever to cut the gas to the kitchen.

After turning off the gas, look for the hose connector in the gas stove and get it free by using a wrench. And yay! Your gas stove is unhooked.

Tips to unhook a gas stove by yourself

  • Before you unhook the gas stove, make sure that the cooktops and grills of the stove are cool.
  • Keep the gas lines as long as possible so that there is no stretch in the gas line. Also, avoid bending the gas line as it can result in gas leakage.
  • Once you have disconnected the hose, apply soapy water to the connection to assure if there is any leakage of gas.
  • While turning off the gas supply to the stove, make sure to turn the gas valve to 90° to cut the gas supply.
  • Wear some sort of appropriate hand gloves to avoid any cut or bruise on your hand while handling the stove.

Is it safe to disconnect a gas stove?

Many people overwhelm the disconnection of the gas stove but in reality, it is very easy and safe to disconnect the gas stove. To pay the wage to someone else to get your stove disconnected is like you are throwing the money out of the window.

The thing that you should bother about while disconnecting the stove is to check for leakage. Even leakage at the minor rate is not acceptable. So to confirm that there is no leakage of gas through the pipeline, you can use soapy water. For this, spray some soapy water on the pipeline and wait for a few seconds. If bubbles are formed, this means that you need to turn off the valve more tightly as the gas is leaking.

Do not confuse the gas leakage with the gas lingering from the connection hose. To overcome the smell of lingering gas from the connection hose, open the windows and door of your kitchen so that there is proper circulation of fresh air.

How to replace a gas stove?

If you want to replace your gas stove with a new one, either for better functioning or for an updated model, follow these simple steps:

  1. First of all, turn off the gas stove and allow the cooktops and grills of the stove to cool down.
  2. Make arrangements to move out the stove from the back wall.
  3. Now, unscrew the connector of the gas line to the stove. Meanwhile, unplug the electrical connection of the stove.
  4. In case, there is any twinge, crack, or bend in the gas line, replace it with a new gas line so that the chances of leakage are reduced to a minimum.
  5. Now, plug in the new stove and screw the gas connector into the new stove.
  6. Turn the gas valve back on and you are ready to use your new stove.

Do not forget to check for leaks before using the newly installed stove.

Conclusion:

In this brief guide, we answered the question “How to unhook a gas stove?”, discussed is it safe to disconnect a gas stove by yourself, and how to replace a gas stove.

References:

Leave a Reply

Your email address will not be published. Required fields are marked *