How to Reset Kitchenaid Dishwasher (3 steps + some tips)

In this brief article, we will answer the question of how to reset Kitchenaid dishwasher.

A malfunctioning KitchenAid dishwasher doesn’t always imply that it’s broken or requires service. As you’ll find out, there could be various minor issues affecting its operation, and most of them can be corrected with these simple reset or reboot sequences!

How to Reset Kitchenaid Dishwasher?

To reset a Kitchenaid dishwasher, simply follow these simple steps for a control panel and function reboot:

  • Make sure the dishwasher door is completely shut and sealed. 
  • Simultaneously press the ‘Energy Saver Dry’ and ‘Hi-temp Scrub’ buttons five times. Allow the unit to settle for about ten minutes.
  • After the fifth time, the lights on the control panel should flash constantly for four to five seconds. You should also hear some whirring sounds.
  • Let the unit recalibrate and reevaluate itself for another five to 10 minutes, or till it completes performing its diagnostics evaluation. Once that’s over, allow the dishwasher to rest for about 10 minutes.
  • Press the cancel or drain button to conclude the reset and activate a two-minute drain cycle. Allow it to complete its run before opening the dishwasher unit. 

Even though reset procedures vary among the models of the KitchenAid dishwasher, the steps described above work for most of them. 

However, if your Kitchenaid Dishwasher doesn’t respond, you can try this manual reset option.

Manual Reset

  • Unplug the dishwasher from its power source for a few minutes, allowing it to reset itself.
  • Plug the dishwasher back into the power source and after about five minutes, check the display panel for any error codes being displayed. 
  • Let the unit recalibrate and reevaluate itself for another five to 10 minutes, or till it completes performing its diagnostics evaluation.
  • Run a test cycle by clicking the normal and heat dry buttons. 

These two reset options should resolve all issues with your KitchenAid dishwashing unit. But if they don’t, you might need to consult a professional technician rather than a dishwasher expert than try troubleshooting the appliance yourself. For instance, the dishwasher might be damaged, or some piece of critical equipment might need replacing.  

Whatever the case, always contact a KitchenAid Appliance Repair Professional and schedule a service appointment.

Does a KitchenAid Dishwasher Have a Reset Button?

Unfortunately, there is no RESET button for users on the KitchenAid Dishwasher. 

As described, you’ll need to press some buttons simultaneously for a number of times to initiate a reset sequence.

Why Would You Need to Reset a KitchenAid Dishwasher?

Reasons leading to a mandatory reset of your dishwasher may include:

  • a cycle that won’t advance
  • the Clean-Complete light doesn’t stop blinking
  • power interruptions
  • dishwasher fails to function altogether

Why Does a KitchenAid Dishwasher Beep?

A sensor within the dishwasher produces a beeping noise to indicate that something has disturbed the washing cycle. For instance, the door latch might not be connected, or the door might not have been closed properly.

Moreover, beeping might also indicate a component failure somewhere within the unit. 

Or it could simply mean nothing and just signal that your dishes are ready for removal from the appliance after a complete cycle.

What Does a Blinking Blue Light on a KitchenAid Dishwasher Indicate?

A blinking blue light could indicate various things on different KitchenAid dishwasher models. The best way to determine what a blue blinking light means is to consult the user manual for the particular model. 

Nevertheless, the most common reasons include:

  • shortage in the control panel
  • component failure
  • interruption of the wash cycle (something to so with the door latch)

How Do You Run A Diagnostic on Your KitchenAid Dishwasher?

As we’ve mentioned, every KitchenAid dishwasher model might have its own procedural sequence to start the diagnostic mode. Consult the user manual to find out the exact steps for your model.

Here are the sequences for three most common Kitchenaid dishwasher models.

  • Kitchenaid Models W10142800B and 8572216

With the unit on standby mode and the doors shut tight, press the ‘Heated Dry’ and ‘Normal’ buttons twice in succession.

  • Kitchenaid Model KUDD03DT

With the unit on standby mode and the doors shut tight, quickly press the ‘High Temp Wash’ button six times, followed by pressing the ‘Start’ button eight times. 

Other FAQs about Dishwashers that you may be interested in.

How hot does dishwasher water get?

How far can a dishwasher be from the sink?

How does a dishwasher soap dispenser work?

What is the difference between Bosch 500 and 800 series dishwashers?

Conclusion

In this brief article, we discussed how to reset the Kitchenaid dishwasher. These appliances are among the most efficient and reliable dishwashers in the marketplace. But like every electrical gadget, they too can face functional issues.

So, if your dishwasher is malfunctioning, simply try these control panel or manual reset procedures before bringing in the big guns. 

If you have any more questions or comments please let us know.

References:

https://www.hunker.com/13407736/the-reset-sequence-for-a-kitchenaid-dishwasher

Hi, I am Charlotte, I love cooking and in my previous life, I was a chef. I bring some of my experience to the recipes on this hub and answer your food questions.